Tecno w5 Remove FRP

                                    FIRST METHOD

1. Install MediaTek USB VCOM Drivers if you haven’t done that. Without the drivers properly installed, you won’t be able to use any of the methods or steps below. – Download

2. Download Miracle Box 2.27A Cracked without box(rar password – bdjakriztek) and save it on your desktop. – Download

3. Set your PC date to 2014.

4. Open the Miracle box 2.27A cracked folder and run the Loader.exe as an admin.

5.  Miracle box should now load.

7. Click on Unlock/Fix tab. Select Clear setting/FRP and then click on the Start  
Button at the bottom.

8. You can select No/Yes in the prompt to make a backup or Skip it before resetting the FRP on your MTK device.

9. Make sure you have a charged battery and your device is completely turned off.

Connect your device via a good USB cable to your PC and the FRP will be removed/reset in a short while.
        

                                     SECOND METHOD

         
The method here involves SP Flashtool. You donot need Miracle box or any Chinese Flashing box or whatever. You will need to download the FRP reset file for your specific device. 

 With this method, you can just reset the FRP on your device like a pro and all you previously had on the device will be saved. 

The size of the files are mostly in kilobytes, very safe and easy to use.